Blaupunkt BPV 655 User Manual download pdf (Page 6)

ENGLISH

E-5

Radio Reception

Memorizing Only the Desired Stations

You can store up to 6 stations on each band (18 for FM I, FM

II and FM III, 12 for AM I and AM II) in the order of your

choice.

1. Press the

BAND

to select the desired band.

2. Rotate the TUN/TRK dial to tune in stations.

3. Press and hold the desired preset memory button

for about 2 seconds until the frequency indicator

flashes twice.

The number of the pressed preset memory button ap-

pears on the display window.

Note

If when you store another station on the same preset number

button, the previously stored station is replaced with new one.

Receiving the Memorized Stations

1. Press the

BAND

to select the desired AM or FM band.

2. Press the

momentarily.

Local/Distant (LO/DX) Selection

This feature is used to select the signal strength at which the

radio will stop during Seek Tuning.

Press the

MUTE / SENS

for more than 2 seconds to select the

Local setting and only strong (local) stations will be received.

The “ lo ” indicator appears on the display window.

Pressing for more than 2 seconds again will select the Dis-

tant setting and the radio will stop at a wider range of signals,

including weaker more distant stations. The “ lo ” indicator

will go out on the display window. DX is the suggested default

setting.

Scan Tuning

1. Press the

BAND

to select the desired AM or FM band.

2. Hold the

SC/PS

pressed for less than 2 seconds.

The unit will scan the selected band for stations and the

unit will stop at each station for 8 seconds, before con-

tinuing to the next station.

Press the

SC/PS

again to stop Scan Tuning and remain

this on the selected frequency.

Preset Scan Tuning

1. Press the

BAND

to select the desired AM or FM band.

2. Hold the

SC/PS

pressed for more than 2 seconds.

The unit will scan preset memory for the 12 stations from

the AM I/AM II band or the 18 stations from the FM I/FM

II/FM III bands. The unit will stop at each preset station

for 8 seconds, before continuing to the next preset sta-

tion.

Press the

SC/PS

again to stop Preset Scan Tuning and

remain this on the selected frequency.

Memorizing Stations Automatically (Travel Store)

1. Press the

BAND

to select the desired AM or FM band.

2. Hold the

BAND

pressed for longer than 2 seconds.

Up to 6 stations with strong signals will be automatically

stored in preset memory for the selected band.

If the radio is in FM I or FM II, it switches to FM III. If the

radio is in AM I, it switches to AM II.

Note

This function is available for FM

III

and AM

Seek Tuning

1. Press the

BAND

to select the desired AM or FM band.

FM I ➜ FM II ➜ FM III ➜ AM I ➜ AM II

(FM III & AM II are Travel Store bands.)

2. Rotate the TUN/TRK dial to tune in stations. Tuning au-

tomatically stops at a broadcasting frequency.

When tuned in to FM stereo broadcasting stations, the

“

” stereo signal indicator will appear on the display

window.

: Lower Frequency.

Higher Frequency.

Manual Tuning

1. Press the

BAND

to select the desired AM or FM band.

2. Rotate and hold the TUN/TRK dial for more than 0.5 sec-

ond to activate the manual tuning mode.

“ MAN ” indicator will appear on the display window.

Rotate again to tune in to stations.

After 4 seconds of completing Manual Tuning, the tuning

control will revert to the Seek Tuning mode.

BPV655(EN)_body 1/10/02, 5:50 PM5

1 2 3 4 5 6 7 8 9 10 11 ... 40 41

Comments to this Manuals

No comments

Blaupunkt BPV 655 User Manual Page 6

Comments to this Manuals

Related products and manuals for Car media receivers Blaupunkt BPV 655