Blaupunkt FRANKFURT RCM 82 User Manual download pdf (Page 7)

23

Frankfurt RCM 82

DEUTSCH

ENGLISH

ITALIANO

PORTUGUES

NEDERLAND

ESPAGÑOL

SVENSKA

FRANÇAIS

Amplifier Section

ON/OFF

For switching the set on,

● turn button 1 clockwise and

● insert the KeyCard completely.

Your stereo is now ready for operation.

For switching the set off,

● turn button 1 counterclockwise or

● remove the KeyCard H.

First press on the KeyCard (to release

it) and then take it out of the slot.

Balance and Fader

With two loudspeakers installed, you can

balance the sound impression left/right; with

four speakers available, you can also adjust

the sound pattern of the front and rear level

(fader).

The balance and fader function is activated

by pressing the GEO button 2.

Balance

For balancing the sound level left/right:

● Press the GEO button 2.

The display G a gives you BAL (Balan-

ce) or FAD (Fader) plus a number bet-

ween -9 and +9.

● Press the rocker switch <</>> I left/

right. The sound of the left and right

channel is balanced; the number on the

display changes between -9 and +9.

The display indication automatically

stops at ‘0’ (= sound of the left and right

channel is balanced).

Fader

For balancing the sound level front/rear (Fa-

der):

● Press the GEO button 2.

The display G a gives you BAL (Ba-

lance) or FAD (Fader) plus a number

between -9 and +9.

● Press the rocker switch

/ J up/

down. The sound of the front and rear

channel is balanced; the number on the

display changes between -9 and +9.

The display indication automatically

stops at ‘0’ (= sound of the front and

rear channel is balanced).

The adjustment is terminated by pressing the

GEO button 2 once again; otherwise, the

display will automatically return to indication

of radio or cassette functions approx. eight

seconds after the last setting has been car-

ried out.

Controlling Treble and Bass

Treble Control

For controlling the high frequencies:

● Press the TREB button 3.

The display G a gives you TRE or

BAS and a number between -6 and +6.

● Press the upper part of the rocker

switch <</>> I for boosting the treble

or the lower part for treble reduction.

The number on the display changes

between -6 and +6. It will automatically

stop at the ‘0’ position (normal).

Bass Control

For controlling the low frequencies:

● Press the BASS button 3.

The display G a gives you BAS or

TRE and a number between -7 and +7.

● Press rocker switch <</>> I to the

right for boosting the basses or to the

left for bass reduction.

The number on the display changes

between -7 and +7. It will automatically

stop at the ‘0’ position (normal).

The treble and bass adjustment is terminated

by pressing the BASS or TEB button 3 once

again; otherwise, the display will automati-

cally return to indication of radio or cassette-

functions approx. eight seconds after the last

setting has been carried out.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Comments to this Manuals

No comments