Blaupunkt KINGSTON DJ Operations Instructions download pdf (Page 14)

29

Kingston DJ Inl.

DEUTSCH

ENGLISH

ITALIANO

PORTUGUES

NEDERLAND

ESPAGÑOL

SVENSKA

FRANÇAIS

Care of your audio equipment

We recommend that you use only C-60/C-90

cassette tapes in your car radio. Protect your

cassettes from dirt, dust and temperatures

exceeding 50 °C. During cold weather, allow

cold cassettes to warm up somewhat before

playing them in order to avoid uneven tape

transport. Operating problems and sound

distortions may occur after approximately

100 hours of playing time and are caused by

dust particles which adhere to the rubber

roller and the audio head.

Use a cleaner cassette to remove normal dirt

build-up. For tougher cases, use a cotton

swab (Q-tip) soaked with alcohol. Never use

any hard tools to clean your unit!

DSC programming

This car radio offers direct software control

(DSC) to adjust a number of default settings

to your personal needs and store them.

Listed below you will find an overview of such

default settings.

To change a setting,

• press DSC.

Then use the rocker switch to select the

functions described in the following and chan-

ge the respective value. The current conditi-

on is indicated on the display.

Select function

Change

setting

Select function

Change

setting

+

LOCAL Seek tuning sensitivity for

local reception

LOCAL 1 - high sensitivity

LOCAL 3 - low sensitivity

DIS Seek tuning sensitivity for

distant reception

DIS. 1 - high sensitivity

DIS. 3 - low sensitivity

COLOUR To match the display colour to

the dashboard illumination.

Select orange or green.

LOUD Loudness - to boost the less

perceptible, deeper tones for

a more natural sound impres-

sion.

LOUD 1 - low boost

LOUD 6 - strong boost

BEEP Acknowledgement tone for

functions requiring a push of

more than 2 seconds. Adjust

the volume of that tone be-

tween 0 and 9 (0 = OFF).

ARI (TA) To adjust the volume of traffic

announcements between 1 -

9. The traffic announcement

will then be reproduced with

this volume (1 = low).

CODE-LED To select the LED mode for

optical theft protection.

LED 1 - LED only flashes if

the car is switched

off via the ignition.

(lo)

(dx)

1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments