Blaupunkt MP3000 User Manual download pdf (Page 9)

ENGLISH

E-8

Turn on/off message edit

You can edit the turn on/off message and store it in memory.

Following four messages can be edit with 12 characters each.

When you turn on the unit, “MESSAGE 1” will be displayed

then “MESSAGE 2” will momentarily displayed before actual

power on.

When you turn off the unit, “MESSAGE 3” will be displayed

then “MESSAGE 4” will momentarily displayed before actual

power off.

Turn-on message

• MESSAGE 1 / MESSAGE 2

Turn-off message

• MESSAGE 3 / MESSAGE 4

1. Repeatedly press the

DISP

to display the “MESSAGE ON”

on the display window.

2. Press the

MUTE / SENS

to flash the “MESSAGE 1”.

3. Rotate the dial to select the desired message you want

to edit.

MESSAGE 1 ➜ MESSAGE 2 ➜ MESSAGE 3 ➜ MES-

SAGE 4

4. Press the

MUTE / SENS

, then enter the character.

A. Rotate the dial in a clockwise direction to select the

desired characters.

(A~Z, a~z, 0~9, ( )

∗ + , − . / ! ” # $ % & ’ : ; < = > ?

@ [ \ ] ˆ _ ` { } ˜ )

B. Press the

TUN/TRK

to move the flashing cursor to

the next position. If you press

TUN/TRK

, the flashing

cursor moves to the left.

C. Repeat steps A. and B. to complete entering the en-

tire message 12 characters max.

Tips

•

To erase/correct a message, press the

DISP

for more

than 2 seconds to clear the character and re-enter.

•

When entering a name, pressing the following but-

tons affects the display of characters as follows:

: Changes to inputting letters. (Starts with “A”.)

If pressed while letters are already selected,

switches between upper and lower case letters.

: Changes to inputting numbers. (Starts with “0”.)

: Changes to inputting symbols. (Starts with “(”.)

: Enters a space (blank).

5. Press the

MUTE / SENS

to store the message.

The new message flashes.

6. To return to the normal radio reception, Press

DISP

Notes

• If you make no button input or dial operation in 20 sec-

onds, the message edit mode will turn off automatically.

• Make sure the “MESSAGE” will be “ON” .

Erasing the turn on/off message

You can erase the turn on/off message if so desired.

1. Repeatedly press the

DISP

to display the “MESSAGE ON”

on the display window.

2. Press the

MUTE / SENS

to flash the message you edit.

3. Rotate the dial to select the desired message you want

to erase.

4. Press the

DISP

for more than 2 seconds.

Repeat steps 1. and 3. if you want to erase other mes-

sage.

5. To return to the normal radio reception, Press

DISP

MP3000_body_en 9/4/01, 4:23 PM8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

Comments to this Manuals

No comments

Blaupunkt MP3000 User Manual Page 9

Comments to this Manuals

Related products and manuals for Car media receivers Blaupunkt MP3000