Blaupunkt MP71 User Manual download pdf (Page 13)

13

ENGLISH

FRANÇAIS

ESPAÑOL

PORTUGUÊS

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Radio Operation

Switching to Radio Mode

If the car radio is in another operating mode:

➮ Press the TUNE button >.

RDS Function

This device is equipped with an RDS radio

receiver. Some FM stations transmit a signal

in addition to the program itself containing

information such as the name of the station

and the type of program (PTY).

If RDS is activated, the station name is dis-

played as soon as it is received. The program

type can also be displayed if required. Read

more about this in the section on “Program

Type (PTY)”.

Switching RDS on and off

To use the RDS function:

➮ Press the TUNE button > when the ra-

dio is operating.

The radio function menu is shown on the dis-

play.

➮ Press the softkey 4 indicating “RDS”.

The RDS function is active if “RDS” is dis-

played with light and shade reversed. When

RDS is switched on or off, “RDS ON” or “RDS

OFF” appears briefly in the display.

To return to the basic radio menu:

➮ Press the TUNE button > or wait for

eight seconds. The settings are then

saved.

Tuner Alternative

Using the TA function (Tuner Alternative), the

device automatically searches for the best fre-

quency on which the current RDS station can

be received.

Switching TA on and off

To use the TA function:

➮ Press the softkey 4 indicating “TA”.

The TA function is active when “TA” appears

in the display with light and shade reversed.

To deactivate the TA function:

➮ Press the softkey 4 indicating “TA”

again.

Select Waveband/Memory Level

This radio can receive FM and AM stations.

Three memory levels are available for the FM

waveband (FMI, FMII and FMT), and two

memory levels for the AM waveband (M and

MT).

Six stations can be stored in each memory

level.

Selecting the waveband

To switch between FM and AM:

➮ Press the TUNE button > when the ra-

dio is operating.

The radio function menu is shown on the dis-

play.

➮ Press the softkey 4 indicating “BND”

until the desired waveband is shown in

the display.

To return to the basic radio menu

➮ Press the TUNE button > or wait for

eight seconds. The settings are then

saved.

Selecting memory level

To switch between the various memory lev-

els (FMI, FMII, FMT, AM, AMT):

➮ Press the softkey 4 indicating “NEXT”

until the desired memory level is shown

in the display.

The memory levels appear in the following

order: FM I, FM II, FMT, M (AM), MT (AMT).

RADIO OPERATION

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Comments to this Manuals

No comments