Blaupunkt RCM 127 Operations Instructions download pdf (Page 11)

36

The system will switch off after approximate-

ly 10 seconds.

When inserting another card type (e.g.

phone or credit card), the display will show

“WRONG KC” for approximately 2 seconds.

The set will switch off automatically.

Remove the wrong card and introduce the

correct KeyCard.

• Press ON to turn on the set.

Removing the KeyCard

Never pull out the KeyCard directly!

• First, slightly push in the KeyCard.

This releases the card and puts it in the prop-

er position for being removed.

• Now you can pull it out.

“Training” a second KeyCard/

Replacing a KeyCard

While operating the unit with the first

KeyCard, you can “train” a second one to

be also used with the set:

• Insert the first KeyCard and turn on the

set.

• Press the DSC button and select

“LEARN KC” with

/ .

• Press << or >>.

The display will switch to “CHANGE”.

• Push in the KeyCard. The card is re-

leased and put in the proper position

for being removed.

• Remove the first KeyCard and insert

the new one.

After the display indication “READY” or

“LEARN KC”,

• press DSC.

Now you can also use the new KeyCard for

operating your unit.

A maximum of two cards can be used for

the set.

When trying to “train” a third one, the ac-

cess authorisation for the KeyCard not used

for the “training” process will be deleted au-

tomatically.

Displaying the radio pass data

Using the KeyCard supplied with your set

you can have the radio pass data such as

the model name, product number (7 6..) and

serial number indicated on the display pan-

el.

Please refer to chapter “DSC programming

- READ KC”.

KeyCard theft protection system

This car radio is supplied with one KeyCard

as standard, though it can also be operated

with a second card.

If you have lost your KeyCard or if it was

damaged, you can buy a new one from your

specialised dealer.

When using a second KeyCard, the basic

settings will be adopted. However, you can

individually store the following functions:

Bass, treble, balance and fader settings,

Loudness, TA (traffic announcement vol-

ume), beep volume, mute volume, lo or dx,

BLS, Dolby B, PTY functions.

In addition, the settings activated before

switching the radio off, such as the station

tuned in, TA priority, AF, AM ON/OFF and

RM ON/OFF will also remained stored.

This ensures that you will find your basic

settings re-adjusted automatically as soon

as you have inserted your KeyCard.

Putting the unit into operation

• Turn on the set.

With the KeyCard tongue sticking out,

introduce the KeyCard into the slot

with the contact area showing up.

The car radio is now ready for operation.

If a wrong KeyCard is inserted, then “CARD

ERR” followed by “WAIT” will appear in the

display. In this case please do not make any

further adjustments.

AriDüPa ..RCM127 gb 24.04.2002, 10:38 Uhr36

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Comments to this Manuals

No comments