Blaupunkt CD50 User Manual download pdf (Page 23)

24

External audio sources

In addition to the CD changer it is also

possible to connect another external au-

dio source to the line output. These

sources can include a portable CD play-

er, MiniDisc player or MP3 player.

If you have not connected a CD chang-

er, it is possible to connect two external

audio sources.

You must activate the AUX output in the

menu.

If you would like to connect another ex-

ternal audio source, you will require an

adapter cable. This adapter cable can

be ordered from any authorized Blau-

punkt dealer.

Switching the AUX output on/off

➮ Press MENU 8.

“MENU” will appear in the display.

➮ Press : repeatedly until “AUX-

IN-1 OFF” or “AUX-IN-1 ON” ap-

pears in the display.

In place of the “1”, there is a “2” for the

second AUX input. If you have connect-

ed a CD changer, then only AUX “2” can

be selected.

➮ Press or : to switch AUX on

or off.

➮ Once you have completed your

selections, press MENU 8 or

OK ;.

Note:

If the AUX input has been switched ON,

you can select it by pressing CD•C @.

EXTERNAL AUDIO SOURCES SPECIFICATIONS

Specifications

Amplifier

Output power: 4 x 25 watts RMS

acc. to DIN 45 324

at 14.4 V

4 x 40 watts max.

power

Tuner

Wavebands:

FM: 87.5 - 107.9 MHz

AM: 530 - 1710 kHz

FM Mono sensitivity:

7.8 dBf

FM frequency response:

30 - 15000 Hz

CD player

Signal-to-noise ratio:

96 dB

Frequency response:

20 - 20000 Hz

Preamp Out

4 channels: 4 V

Subject to technical modification!

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments