Blaupunkt DM2000 User Manual download pdf (Page 8)

E-7

ENGLISHFRANÇAISESPAÑOLPORTUGUÊS

Turn on/off message edit

You can edit the turn on/off message and store it in memory.

Following four messages (factory set) can be edit with 8 char-

acters each.

Turn-on message

• MESSAGE 1 : HELLO

• MESSAGE 2 : WELCOME

Turn-off message

• MESSAGE 3 : SEE YOU

• MESSAGE 4 : GOOD-BYE

1. Repeatedly press the

DISP

to display the “ MESSAGE ”

on the display window.

2. Rotate the dial to select the desired message you want

to edit.

MESSAGE1 ➜ MESSAGE2 ➜ MESSAGE3 ➜ MES-

SAGE4

3. Press the

MUTE / SENS

, then enter the character.

A. Rotate the dial in a clockwise direction to select the

desired characters.

(A➜ B ➜ C ➜ ...Z➜ < ➜ > ➜ ∗ ➜ + ➜

′

➜ - ➜ ′ ➜ /

➜0➜1➜2➜3...9➜“ ”Space )

B. Press the

TUN/TRK

to move the flashing cursor to

the next position. If you press

TUN/TRK

, the flashing

cursor moves to the left.

C. Repeat steps A. and B. to complete entering the en-

tire message 8 characters max.

Tip

To erase/correct a message, press the

DISP

for more than

2 seconds to clear the character and re-enter.

4. Press the

MUTE / SENS

to store the message.

The new message flashes.

5. To return to the normal radio reception, Press

DISP

Note

If you make no button input or dial operation in 20 seconds,

the message edit mode will turn off automatically.

Erasing the turn on/off message

You can erase the turn on/off message if so desired.

1. Repeatedly press the

DISP

to display the MESSAGE, then

rotate the dial to select the message you want to erase.

2. Press the

MUTE / SENS

The message flashing.

3. Press the

DISP

for more than 2 seconds.

Repeat steps 1. and 3. if you want to erase other mes-

sage.

4. To return to the normal radio reception, Press

DISP

Demonstration mode

The unit shows a demonstration of each function.

When a demonstration is finished, it begins again after 10

seconds, and this is repeated.

1. Press the

PWR

to turn off the unit.

2. Press the

DISP

and

simultaneously for more than 2

seconds to activate the demonstration mode.

Press both button again for more than 2 seconds to can-

cel this mode.

Playing the CD player

Loading Discs

1. Press the

OPEN

and insert the disc.

2. Close the front panel.

Playback begins automatically.

‘‘ LOADING ’’ indicator will flash in the display window.

Note

Make sure that the front panel is closed when playback be-

gins.

Playback with the front panel open causes the

unit to turn off automatically in about 10 min-

utes.

! NEVER Insert a 3-inch CDs.

This unit is designed for playback of standard 5-inch CD’s

only. Do not attempt to use 3-inch CD singles in this unit,

either with or without an adaptor, as damage to the player

and/or disc may occur.

Tips

• When a CD is loaded, the

on the display remains lit.

• During playback of a CD, the pie-shaped signal-strength

meter

spins.

CD Operations

Label side up

Key Largo (Eng) p.1-13 6/19/00, 10:02 AM7

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 52 53

Comments to this Manuals

No comments

Blaupunkt DM2000 User Manual Page 8

Comments to this Manuals

Related products and manuals for Car speakers Blaupunkt DM2000