Blaupunkt WIEN RD 127 Operations Instructions download pdf (Page 13)

27

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Traffic announcement priority

on/off

If the priority for traffic announcement pro-

grammes is activated, “TA” will light up in the

display.

To switch the priority on or off:

• Press the TA button.

When pressing TA while a message is being

broadcast, this message will be interrupted.

The unit will then switch back to the previous

condition. The priority for all other traffic

messages remains active.

Beep tone

If you leave the reception area of the traffic

programme station currently tuned into, you

will hear a beep tone after approximately 30

sec.

This tone will also be released when pressing

a preset button which has no traffic pro-

gramme allocated to it.

Receiving traffic programme stations with RDS-EON

• Press the corresponding preset button

briefly to recall the station.

Switching from stereo to mono

(FM)

If reception is poor, you may get better sound

quality by switching to mono:

• Hold down the MIX / lo button until the

display shows “MONO” or “STEREO”.

For mono playback, the stereo sign

will disappear from the display.

Each time the radio is switched on, it is

automatically adjusted for stereo playback.

The unit will automatically switch to mono if

the received signal is not strong enough for

stereo playback.

The abbreviation “EON” stands for En-

hanced Other Networks, meaning the ex-

change of information within a radio network.

Many FM broadcasters offer traffic messag-

es for their service area at regular intervals.

All traffic programme stations transmit a spe-

cial carrier signal alongside their pro-

grammes, which is decoded by your car

radio. If this signal is identified, “TP” will

appear in the display (Traffic Programme).

In addition to these, there are also stations

which do not actually transmit traffic pro-

grammes themselves, but by using RDS-

EON they offer the possibility to receive the

traffic messages broadcast by another traffic

programme station in the same radio net-

work.

If you listen to one of these stations (e.g.

NDR3), “TP” will appear in the display as

soon as the priority for traffic information

stations is activated, i.e. “TA” must light up as

well.

If a traffic announcement is broadcast, the

radio will automatically switch to the linked

traffic programme station (in this case,

NDR2) for the duration of the message and

return to the original programme (NDR3)

afterwards.

BA Wien/Re RD127 gb® 10.05.2002, 15:40 Uhr27

1 2 ... 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments