Blaupunkt DX-R4 Operations Instructions download pdf (Page 101)

101

INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER

ENGLISH

DEUTSCH

Calibrating the device

The INSTALLATION setup menu contains all the necessary items for preparing

the TravelPilot for operation once it has been installed.

Calibrating after installation (new installation)

If you installed the unit yourself, the system has to be calibrated to suit your

vehicle.

1 Select INSTALLATION in the setup menu.

2 Select the CALIBRATION menu item.

3 Select the NEW INSTALL menu item.

4 Press the right knob/pushbutton ;.

✔ The system display will now guide you through the installation process.

Please follow the instructions provided by the system. The TravelPilot first car-

ries out a system test.

5 Carry out the steps as instructed by the system and

6 press the right knob/pushbutton ;.

Cancelling calibration

You have the option of cancelling the procedure at any time. If you want to

cancel the installation procedure,

1 use the right knob/pushbutton ; to select ABORT and

2 press the right knob/pushbutton ;.

✔ The previous item in the installation procedure is displayed.

After the system test is complete, the system will automatically carry out the

actual calibration. You will be required to drive an 8 to 10 mile route with good

GPS reception.

Before you start the process, you will be asked to confirm the deletion of any old

calibration values that may already be set.

INSTALLATION

SYSTEM TEST

CALIBRATION

GPS STATUS

CALIBRATION

TYRE CHANGE

NEW INSTALL

STATUS

MANUAL

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 110 111

No comments

Blaupunkt DX-R4 Operations Instructions Page 101