Blaupunkt SAN FRANCISCO CD70 User Manual download pdf (Page 8)

8

To “train” a new KeyCard as a replacement

for a lost or unusable KeyCard:

➮ Insert the remaining valid KeyCard and

switch on the unit.

➮ Press the MENU button 8.

➮ Press the soft key 4 with the display

allocation “KC”.

➮ Press the soft key 4 with the display

allocation “LRN”.

The display will read “LEARN KC”.

➮ Remove the first KeyCard.

The display will read “INSERT”.

➮ Insert the new KeyCard.

The display will read “LEARN OK”.

To exit the KeyCard menu

➮ press the MENU button 8 or the OK

button 5.

Now the car radio can be used with two Key-

Cards again.

Lost or damaged KeyCards

If all of the KeyCards belonging to a unit have

been lost or damaged, first a new KeyCard

with the master code of the unit must be

“trained”. The master code of the unit is con-

tained in the radio pass.

Always keep the radio pass in a safe

place, but never in your vehicle.

To “train” a new KeyCard, follow the instruc-

tions given in the section “Training a new Key-

Card / entering the master code”.

If necessary, you can use this KeyCard to train

a second KeyCard. For instructions on how

to do this, read the section “Replacing / train-

ing KeyCards”.

New KeyCards can be obtained from your

dealer.

“Training” a new KeyCard /

entering the master code

If you no longer have any valid KeyCards for

your unit and want to “train” a new KeyCard:

➮ Insert a new KeyCard that is unknown

to the unit.

➮ Close the operating panel.

➮ Turn off the unit if necessary.

➮ Simultaneously hold down the TUNE

button > and the second soft key 4

from the top on the left side 2.

The display will read “0000”.

Enter the four-digit master code from the ra-

dio pass as follows:

➮ Use the / buttons 7 to enter the

respective digits of the master code.

Press the buttons until the desired num-

ber appears on the display.

➮ Use the buttons 7 to move from

one digit to the next during input.

➮ Once the master code is displayed cor-

rectly, press the OK button 5.

The new KeyCard is accepted when the unit

switches to play.

Optical theft protection indicator

(LED)

The ON/OFF button and the CD bay illumi-

nation can be set to blink when the unit is off

and the KeyCard has been removed. To do

this, the menu setting “LED” must be set to

“ON”.

➮ Press the MENU button 8.

➮ Press the soft key 4 with the display

allocation “KC”.

➮ Press the soft key 4 with the display

allocation “LED”.

The display will show the current status “LED

ON” or “LED OFF”.

THEFT PROTECTION

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Comments to this Manuals

No comments