Blaupunkt SYDNEY RCM 128 User Manual download pdf (Page 17)

43

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

If the system is unable to find a station of-

fering the selected programme type, the dis-

play will show “NO PTY” and a beep tone

will be released. The station received be-

fore starting seek tuning will be tuned in.

You can assign different programme types

to each preset position. Please refer to the

next chapter “Storing programme types”.

b) Using the << >> buttons of the rocker

switch

When PTY is switched on, you can se-

lect a programme type using buttons

<< >>.

• Press << or >>; the programme

type selected last will be displayed

for three seconds.

• During this period press >> (for-

wards) or << (backwards) to select

the desired type.

• Press << or >> as many times as

required.

If you wish to listen to a station offering

the selected PTY,

• press

/ to start seek tuning op-

eration.

If the system is unable to find a station of-

fering the selected programme type, the dis-

play will show “NO PTY” and a beep tone

PTY priority

Situation:

PTY is switched on and lights up in the dis-

play.

No station offering the selected programme

type can currently be received (with seek

tuning or scan).

The set will switch back to the previous sta-

tion.

As soon as a programme with such PTY can

be received within the broadcasting network,

the unit will switch over to the correspond-

ing station for the duration of the pro-

gramme.

Example:

German broadcasting network NDR:

- Station tuned in: NDR3.

- “PTY” lights up in the display.

- Programme type “POP” selected.

- Seek tuning is started.

- No station with “PTY-POP” can be

found.

- The display shows “NO PTY” and

- automatically switches back to NDR3.

- NDR2 airs a “PTY-POP” programme.

- The system will switch to the linked

station NDR2 for the duration of the

“POP” programme.

will be released. The station received be-

fore starting seek tuning will be tuned in.

Storing programme types

One programme type was assigned to each

of the preset buttons 1-6 at the factory.

If desired, you can also store other availa-

ble programme types.

To do so, make sure that “PTY” lights up in

the display.

• If necessary, press the PTY button to

switch on the function.

• Select a programme type using but-

tons << >> and

• hold down the desired preset button

(1-6) until you hear a beep.

Now the selected programme type can be

recalled by pressing this preset. For this the

PTY function must be active.

Scanning stations with PTY-SCAN

Condition: “PTY” must appear in the display.

• Press the SC button.

All received stations offering the selected

programme types will be scanned.

To switch off PTY-SCAN:

• Press SC once again.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments