Blaupunkt HELSINKI RTM 127 Operations Instructions Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 68
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
86
Search
Up
Down
<< / >> Up/Down in increments
(for FM only when AF is switched off)
Manual tuning with << / >>
You can also tune in a station manually.
Important:
AF must be switched off (i.e. the AF or
REG symbol does not light up in the dis-
play).
If necessary, deactivate this function:
Press AF/#.
Manual tuning:
Press << / >>; the frequency will
change in degrees in the downwards
or upwards direction.
If you hold down the right or left part of the
rocker switch, the frequency scan will ac-
celerate in the corresponding direction.
Enter the frequency directly
For FM or FMT, it is possible to enter the
station frequency directly.
Start your entry
by pressing 0.
Then enter the frequency, beginning
with the first digit. You need not enter
a decimal point.
Press CL to cancel this process or OK to
confirm your entry.
Scroll through the broadcasting
networks (FM only)
You can use the << / >> buttons to tune into
stations in your reception area.
If it is possible to receive several programs
in the same broadcasting network, you can
scroll through them in the forwards direc-
tion by pressing >>, or backwards using the
<< button, e.g. NDR 1, 2, 3, 4, N-JOY.
Important: You must have tuned into these
stations at least once previously and AF
must be active (lights up in the display).
Start Travelstore, for example:
Press BND for 2 seconds; the system
will start to run through the frequency
band.
If AF does not light up,
press AF/#.
This fulfils the requirements for selecting sta-
tions with << / >>.
Store radio stations
You can store the following number of radio
stations for the different wavebands:
FM 19
TS (FM-Travelstore) 9
MW 9
LW 9
Use BND to select the desired wave-
band.
Select a radio station using the rocker
switch (automatically with
/ or man-
ually with << / >>).
Press the desired station preset for ap-
prox. 1 second until you hear a beep.
If you want to store the radio station on a
two-digit preset
press 1 briefly and then press the
second button within two seconds and
hold it down until you hear a beep.
You have now stored the radio station.
The station preset will appear in the display.
Note:
If you tune into a station which has already
been stored before, then the corresponding
preset position and memory bank will flash
Radio operation with RDS (Radio Data System)
Helsinki gb1 12.06.2002, 10:47 Uhr86
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Comments to this Manuals

No comments