Blaupunkt MP3000 User Manual download pdf (Page 18)

ENGLISH

E-17

Connections

Warning

• To prevent short circuit, remove the key from the ignition

and disconnect the battery’s (–) terminal.

• This unit is designed for negative ground 12 V DC operation

only. You can not use it for 24 V or other types of car batteries.

Connection procedure

Caution

• DO NOT connect any speaker wires to the metal body or

chassis of the vehicle.

• DO NOT connect the speaker common (–) wires to each

other.

• Connect each speaker wire directly to each speaker terminal.

• All speaker common (–) wires must remain floating.

ie. No common connections or connection to vehicle grd.

• Connect each pair of speaker leads only to a single speaker

(or speaker system) that has an impedance of least 4 ohms,

as well as 47-watt power-handling capability.

• Do not connect speaker leads to any inputs on external

amplifiers. This will cause damage to the internal amplifier

of this unit.

1 Make sure the car’s ignition key has been removed.

2 Disconnect the negative (–) terminal of the car’s bat-

tery.

3 Connect the wiring harness wires in the following

order : Ground wire (Black), +12V Constant Power

Supply (Yellow), +12V Accessory/Switched (Red) and

Power Antenna/Amplifier Turn On (Blue), and tape

each so they do not come in contact with each other.

4 Connect the speaker wires of the wiring harness.

5 Connect the car’s antenna terminal to the antenna

socket of the unit.

6 Connect the detachable wire harness to the unit.

7 Reconnect the negative (–) terminal of the car’s bat-

tery.

8 Start the car’s engine.

9 Make sure the unit operates properly.

10 Defeat Demo mode. (See page 7.)

Connection procedure

(White)

(White/Black)

(Gray)

(Gray/Black)

(Green)

(Green/Black)

(Violet

(Violet/Black)

Left

Speaker

Right

Speaker

Do Not

Connect

Front Left

Speaker

Front Right

Speaker

Rear Left

Speaker

Rear Right

Speaker

(White)

(White/Black)

(Gray)

(Gray/Black)

(Green)

(Green/Black)

(Violet

(Violet/Black)

Do Not

Connect

2-speaker System4-speaker System

+12V Constant Power Supply (Yellow)

+12V Accessory/Switched (Red)

Ground Wire (Black)

Power Antenna/Amplifier Turn On (Blue)

ANTENNA PLUG

ANTENNA SOCKET

In the case of a 2-speaker system,

tape the ends of unconnected

terminals to prevent short circuit

Preamp Out/AUX IN Connections

• Since this unit has Line Level Outputs, you can use an amplifier to upgrade your vehicle stereo system.

Cassette Player, etc.

Rear Speakers

RCA Line-out / AUX IN

PRE

OUT

AUX

LINE OUT

External Amplifier

RCA Line-out Jacks

• Connect a patch cable (not supplied) from the White and Red RCA line output jacks of the unit to the line input terminals of

the external amplifier.

MP3000_body_en 9/4/01, 4:24 PM17

1 2 ... 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments

Blaupunkt MP3000 User Manual Page 18

Comments to this Manuals

Related products and manuals for Car media receivers Blaupunkt MP3000