Blaupunkt FRANKFURT RCM 104 User Manual download pdf (Page 12)

Frankfurt RCM 104

34

Scanning stations with Radio

Scan

Beginning with the station currently tuned in,

you can scan the following stations. Choose

the desired SCANTIME in the DSC menu.

To activate the scan:

• Press PS for about 2 seconds.

Either the scanned frequency or the

station name starts flashing in the dis-

play. During the actual scan process,

“SCAN” is flashing.

To continue listening to a scanned stati-

on/switch the scan off:

• Briefly press PS.

If no station is selected during the scan, the

scan function will be automatically switched

off after the entire frequency band has been

passed through. The radio will revert to the

station the scan began from.

For more information, please also refer to

chapter “DSC programming - SCANTIME”.

PTY

The PTY signal is transmitted along with the

RDS data telegram and contains information

on the program type. Program types e.g. are:

news, current affairs, information, sport, etc.

This enables you to choose a certain type of

program according to your personal needs.

With PTY you are prepared for the future of

RDS.

• Press the PTY button.

You can now use the preset buttons to choo-

se one out of six different program types.

In the PTY mode the preset buttons no longer

have their original function (see also chapter

“DSC programming - PTY SET”).

PTY and seek tuning

First switch on the PTY mode and choose a

program type (e.g. 4 = sports). When the

seek tuning function is activated via

/ , the

radio will only capture those stations which

transmit the selected PTY code. If no such

station is found, the radio returns to the

original mode. The display shows “SPORT”

for approximately 3 seconds.

PTY and scan

First switch on the PTY mode and choose a

program type (e.g. 4 = sports). When the

scan function is activated, the system will

only sample those stations which transmit

this PTY code.

Recalling stored stations

You can recall any stored station by pressing

the corresponding preset button.

• Press FMT or M•L to select the wave-

band. For FM, also choose the corre-

sponding memory bank by pressing

FM

T until the desired bank is indicated

in the display.

• Briefly press the corresponding preset

button.

Preset scanning

You can have all of the stations stored in one

waveband scanned by using the Preset Scan

function. Choose the desired SCANTIME in

the DSC menu.

• Briefly press PS.

All of the stations in that waveband will

be scanned one after another.

Depending on which memory bank has been

activated for FM, all of the stations in either I,

II or the Travelstore level will be scanned. If

a preset is not in use, it is skipped.

To stop the scan:

• Press the PS button once again.

The radio will continue to play the cur-

rently scanned station.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comments to this Manuals

No comments